Posts for category: Dental Procedures
Did you see the move Cast Away starring Tom Hanks? If so, you probably remember the scene where Hanks, stranded on a remote island, knocks out his own abscessed tooth — with an ice skate, no less — to stop the pain. Recently, Dear Doctor TV interviewed Gary Archer, the dental technician who created that special effect and many others.
“They wanted to have an abscess above the tooth with all sorts of gunk and pus and stuff coming out of it,” Archer explained. “I met with Tom and I took impressions [of his mouth] and we came up with this wonderful little piece. It just slipped over his own natural teeth.” The actor could flick it out with his lower tooth when the time was right during the scene. It ended up looking so real that, as Archer said, “it was not for the easily squeamish!”
That’s for sure. But neither is a real abscess, which is an infection that becomes sealed off beneath the gum line. An abscess may result from a trapped piece of food, uncontrolled periodontal (gum) disease, or even an infection deep inside a tooth that has spread to adjacent periodontal tissues. In any case, the condition can cause intense pain due to the pressure that builds up in the pus-filled sac. Prompt treatment is required to relieve the pain, keep the infection from spreading to other areas of the face (or even elsewhere in the body), and prevent tooth loss.
Treatment involves draining the abscess, which usually stops the pain immediately, and then controlling the infection and removing its cause. This may require antibiotics and any of several in-office dental procedures, including gum surgery, a root canal, or a tooth extraction. But if you do have a tooth that can’t be saved, we promise we won’t remove it with an ice skate!
The best way to prevent an abscess from forming in the first place is to practice conscientious oral hygiene. By brushing your teeth twice each day for two minutes, and flossing at least once a day, you will go a long way towards keeping harmful oral bacteria from thriving in your mouth.
If you have any questions about gum disease or abscesses, please contact us or schedule an appointment for a consultation. You can learn more by reading the Dear Doctor magazine articles “Periodontal (Gum) Abscesses” and “Confusing Tooth Pain.”
Orthodontics shares a principle with the classic tug of war game: if you want things to move in the right direction you need a good anchor. Anchors help braces and other appliances apply constant pressure to misaligned teeth in the direction they need to go to correct a malocclusion (poor bite).
Orthodontic treatments work in cooperation with an existing oral mechanism that already moves teeth naturally in response to biting forces or other environmental factors. The key to this mechanism is an elastic tissue known as the periodontal ligament that lies between the tooth and the bone. Besides holding teeth in place through tiny attached fibers, the ligament also allows the teeth to move in tiny increments.
Braces’ wires laced through brackets affixed to the teeth exert pressure on them in the desired direction of movement –the periodontal ligament and other structures do the rest. To maintain that pressure we need to attach them to an “anchor”—in basic malocclusions that’s usually the back molar teeth.
But not all malocclusions are that simple. Some may require moving only certain teeth while not moving their neighbors. Younger patients’ jaws and facial structures still under development may also need to be considered during orthodontic treatment. That’s why orthodontists have other anchorage methods to address these possible complications.
One example of an alternate anchorage is a headgear appliance that actually uses the patient’s skull as the anchor. The headgear consists of a strap running around the back of the head and attached in front to orthodontic brackets (usually on molar teeth). The pressure it exerts can trigger tooth movement, but it can also help influence jaw development if an upper or lower jaw is growing too far forward or back.
Another useful anchorage method is a tiny metal screw called a temporary anchorage device (TAD) that is implanted into the jawbone above the teeth through the gums. Orthodontists then attach elastic bands between implanted TADs and specific braces’ brackets or wires to exert pressure on certain teeth but not others with pinpoint accuracy. After treatment the TADs can be easily removed.
Using these and other appliances allows orthodontists to customize treatment to an individual patient’s particular malocclusion. With the right anchor, even the most complex bite problem can be transformed into a beautiful and healthy smile.
If you would like more information on orthodontic treatment, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Orthodontic Headgear & Other Anchorage Appliances.”
Are you embarrassed by your front teeth? Maybe it’s just moderate defects—a chipped tooth here, an irregularly shaped tooth there—but it’s enough to make you less confident to smile.
There are a number of ways to transform your teeth’s appearance like porcelain veneers or crowns. But a relatively inexpensive method that’s less involved is to bond dental material called composite resin to your teeth to correct defects. Made of synthetic resins, these restorative materials can mimic your own natural tooth color. We can also artistically shape them to create a more natural look for an irregular tooth.
If you’re looking to change the way your front teeth look, here are 3 reasons to consider composite resins to restore them.
They can be applied in one office visit. Although effective, veneers, crowns and similar restorations are typically outsourced to dental labs for custom fabrication. While the results can be stunning, the process itself can take weeks. By contrast, we can colorize, bond and shape composite resins to your teeth in just one visit: you could gain your “new smile” in just one day.
They don’t require extensive tooth alteration. Many restorations often require tooth structure removal to adequately accommodate them, which can permanently alter the tooth. Thanks to the bonding techniques used with composite resins, we can preserve much more of the existing tooth while still achieving a high degree of artistry and lifelikeness.
Composite resins are stronger than ever. Over the years we’ve learned a lot about how teeth interact with each other to produce the forces occurring during chewing and biting. This knowledge has contributed greatly to the ongoing development of dental materials. As a result, today’s composite resins are better able to handle normal biting forces and last longer than those first developed a few decades ago.
Composite resins may not be suitable for major cosmetic dental problems, but you might still be surprised by their range. To learn if composite resins could benefit your situation—even a large defect—see us for a complete examination.
If you would like more information on composite resin restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Artistic Repair of Front Teeth with Composite Resin.”
With exciting innovations in cosmetic dentistry over the last few decades, we can now transform nearly any unattractive smile. One of the best and most cost-effective of these is the porcelain veneer. These thin layers of dental porcelain are bonded over the front of chipped, slightly misaligned or stained teeth to create an entirely new look.
Veneers have evolved over time, especially with the materials they contain that give them their beauty and life-likeness. The first veneers were made mainly of feldspathic porcelain, a mineral composition known for its similarity in color and translucence to natural teeth.
But because this early porcelain had a high amount of silica (in essence, glass), and because they were created through overlaying several thin layers that weren’t as strong as a single piece, they were prone to shattering. This made them problematic for teeth subject to heavy biting forces or patients with clenching or grinding habits.
The situation changed dramatically in the 1990s, when dental labs began adding Leucite, a sturdier glass-like mineral that didn’t diminish the porcelain’s translucence. Not only did Leucite make veneers more shatter-resistant, it also enabled dental technicians to fashion most of the veneer in one piece to further strengthen it.
More recent veneers may now incorporate an even stronger material called lithium disilicate. Because lithium disilicate has twice the strength of Leucite, veneers made with it can be as thin as 0.3 millimeters. Not only does this blend together the most desirable qualities expected of a veneer—strength, aesthetic appeal and easy fabrication—it allows for a broader range of situations and uses.
Both of these materials can be pressed or milled to assume the exact shape necessary to fit a particular tooth. The manufacturing process also allows for creating smaller veneers that can then be overlaid with porcelain for the most life-like appearance possible.
Thanks to these stronger materials enhancing the natural beauty of porcelain, we now have a wider creative palate for transforming your smile.
If you would like more information on porcelain veneers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Porcelain Veneers: Your Smile—Better Than Ever.”
If you have a problem tooth we’ve recommended removing, those “Tooth in one day” ads—a tooth removed and an implant placed at the same time—might start to pique your interest. But there are a few factors we must consider first to determine if this procedure is right for you. Depending on your mouth’s health conditions, you may need to wait a little while between tooth extraction and implantation.
Here are 3 timing scenarios for receiving your implant after tooth removal, depending on your oral health.
Immediately. The “tooth in one day” scenario can be much to your liking, but it could also be tricky in achieving the best results. For one, the implant may fit too loosely—the bone around the socket might first need to heal and fill in or undergo grafting to stimulate regeneration. In other words, immediate implant placement usually requires enough supporting bone and an intact socket. Bone grafting around the implant is usually needed as well.
After gum healing. Sufficient gum coverage is also necessary for a successful outcome even if the bone appears adequate. To guard against gum shrinkage that could unattractively expose too much of the implant, we may need to delay implant placement for about 4 to 8 weeks to allow sufficient gum healing and sealing of the extraction wound. Allowing the gums to heal can help ensure there’s enough gum tissue to cover and protect the implant once it’s placed.
After bone healing. As we’ve implied, implants need an adequate amount of supporting bone for best results. When there isn’t enough, we might place a bone graft (often immediately after tooth extraction) that will serve as a scaffold for new bone to grow upon. Depending on the degree of bone loss, we may wait until some of the bone has regenerated (about 2 to 4 months) and then allow the natural process of bone cells growing and adhering to the implant (osseointegration) to complete the needed bone growth. If bone loss is extensive, we may need to wait until full healing in 4 to 6 months to encourage the most stable outcome.
If you would like more information on the process of obtaining dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Implant Timelines for Replacing Missing Teeth.”